Ever need to update your family plan address with Spotify, or simply enter incorrect information when signing up? Have no fear, they make you jump through hoops.
I tried signing up for a Spotify family plan because I wanted to get rid of Google Music, however I made a simple mistake. After signing up, they have you enter your name and address for the family account, and I accidentally put my wife’s name in there because I thought it was for an invite. I realized this was incorrect afterwards when I noticed that she wasn’t in the list of invitees, so I began searching for a way to fix this. I ran across this support page where they say that you need to contact support, implying that support can change this information.
As it turns out, that’s not the case. You’ll need to create a new account and support needs to migrate your music collection. Because, you know, why have one account when you can have two? Anyway, here’s the resulting conversation.
Spotify, you really need to fix this. Making your customers jump through hoops to do something simple like changing your address should be easy. And don’t give me the TOS BS because it says nothing about having to create a new account — and moving, together, all at the same time, is generally what families do, and you should support that without having to jump through massive hoops.
If you know of any good alternatives to Google Music and Spotify, please let me know. I still want to ditch Google Music because that was the whole point of this to begin with.
P.S. Arvin was nice about this and this is not a complaint about him. This is a complaint about Spotify’s “solution” on the matter.
I’ve been in the Amateur Radio scene for a year now, which is not that long compared to the old-timers which have had their licenses for 50 years or more. However, that is long enough to notice some of the elitism that exists even in this hobby.
Today I tried to go to the Duluth Fry’s Electronics store and was not let in because of my bag. I refused to leave my bag in the car or check it, and thus my only other option was to leave and find somewhere else to shop. I found what I needed at Micro Center, which I highly recommend over Fry’s Electronics. While they have a smaller selection of electronics parts, you won’t be treated like a criminal as soon as you walk in the door.
Update: I received a reply from John McGuffin, District Manager, indicating that the intent of their policy is not to deny people carrying bags from entering the sales floor. See the full reply below my initial email.
I received the following email from Mandrill yesterday which unfortunately means that I will have to discontinue my usage of Mandrill for sending and receiving email. Specifically, I am currently using a free Mandrill account as the incoming email provider for Disposamail, and continuing my usage of Mandrill is not worth $20 per month for a paid MailChimp account. I will therefore have to revert to an older version of Disposamail which uses Haraka and update it to match the functionality of the Mandrill version.
I’ve also been wanting to update Disposamail to use Angular and this is a great opportunity to do so.
Update (3/10): Disposamail has been updated to receive and process raw email bodies from an external service such as postfix and no longer relies on Mandrill.
Recently I’ve switched from using long-ish, better-than-stock antennas on my HTs to short stubby antennas which are more convenient for carrying them around. Specifically, I was using the Diamond SRH-519, which is advertised as having +3db gain over stock antennas, while the new antennas are the Maldol MH-209SMA for radios which use normal SMA-male antennas, and the Comet SMA-209J for my Baofeng which uses the odd SMA-female antennas.
From my non-scientific tests within the perimeter of Atlanta, they appear to perform just as well as the stock and long antennas that I was using, at least while using repeaters that are located within the perimeter; I have been able to access every repeater that I would be able to with the long antennas from any location which I would normally use my HTs.
I do keep my other antennas in my bag in the event I need a better antenna for any reason, however over the last month or so I have yet to need them. At the moment, the convenience of short antennas overpower the usefulness of higher gain antennas.
For those of you that were at the TechFest this weekend and wondering where the schematic was for my Baofeng interface, above is the schematic for it. This schematic is also available on Digi-Key’s SchemeIt. Have fun!
Update: I have since taken the BF-F8 HP completely apart and the backing appears to be painted aluminum, not plastic, and have updated this article accordingly.
I’ve gotten into amateur radio recently and therefore have been looking into a lot of different handheld radios. Within the amateur radio market, Baofeng is generally the cheapest and is a good bang for the buck, however there’s a lot of question over what the “real” radios are as Baofeng is a Chinese manufacturer. Specifically, the two largest resellers of Baofeng radios are Baofeng Tech and Foscam (i.e., baofengradio.us). First, to settle the fact that they are both authorized resellers as Baofeng, in a recent press release explaining their renaming to Pofung, referred to both companies as “authorized distributors,” and therefore they both sell “official” Baofeng radios (Foscam as mentioned as “baofengradio.us”).
The two specific radios that seem to be the source of all this talk is Baofeng Tech’s BF-F8HP and Foscam’s BF-F9 V2+; they both use the same radio internally however they have different casings, of which Foscam’s is the same case as the UV-5R V2+. The BF-F8HP also comes with a higher capacity battery, a better antenna, and a better manual, however I’m more concerned with the actual quality of the radio.
It appears that Google changes it’s Google Doodle just for you on your birthday, assuming that Google knows what your birthday is. While I like it, the only potential problem I see is that it effectively hides what the “real” doodle is for the day. For instance, today’s actual doodle was the following:
In other words, had I not used an incognito window to see what the doodle actually was for the day, I would have never known about Emmy Noether. Though to be honest, I never really pay attention unless it’s something cool and interactive like PAC-MAN.
For the second time in the last few months, GoDaddy has locked my account and forced a password change “for security purposes”. While I would expect this kind of behavior if someone managed to login to my account in another country or in an area that I’m not normally in, GoDaddy seems to be jumping the gun a little bit and generally being silly about how they’re handling this.
To give a little bit of background, I have two-factor authentication turned on as I do with all of my accounts that support it. If someone did manage to guess my password, I would have received a text message with a verification code; I have not, however, received an unwanted text which means that no one actually guessed my password. Therefore, asking to change my password is a bit premature; it’s as if I were asked to change the locks to my home because someone tried to get in with my neighbor’s key.
In other words, I was asked to change my password because it succeeded in protecting my account. Thanks GoDaddy.